What the Fleet Livery Package Covers
The Fleet Livery Package is built for businesses that need repeatable branding across more than one vehicle. It is not a one off wrap for a single unit, but a controlled livery system with the same placement, colour matching and finish across your fleet. That matters when vehicles are on the road every day, parked at different sites and seen by customers in many suburbs or towns.
The package can be set up as partial livery, full colour change sections, cut vinyl identification, reflective safety markings or a mix of these depending on how the vehicles are used. For example, a delivery fleet may need door branding, rear panel contact details and unit numbers, while a service fleet may need stronger visibility for compliance and easy identification at client premises.
- Consistent logo and contact placement on every vehicle
- Standard colour matching across different vehicle types
- Option for unit numbering and regional identifiers
- Suitable for one branch or nationwide rollouts
Because fleet vehicles age at different rates, the package is planned so new units can be added later without the artwork shifting. That saves time and keeps the whole line looking tidy, even when a vehicle is replaced or repaired after an accident.
Sizes, Vehicle Types and Livery Options
Every fleet has different vehicle bodies, so the package is sized around the actual vehicle and the way it is used. A compact hatchback does not need the same coverage as a one ton bakkie, and a refrigerated van needs different panel priorities from a sales car. We work from your measurements, vehicle list or photos to prepare a layout that can be repeated across the fleet.
Common options include door logos, bonnet marks, side panel copy, rear door branding, roof signage, magnet alternatives for temporary use and reflective strips for after dark visibility. If your vehicles have mixed body styles, the livery can be adapted while keeping the same spacing and visual rules. That way, the brand stays recognisable even when the panel sizes differ a bit.
- Small cars, SUVs and service vehicles
- Bakkies, half ton and one ton pickups
- Panel vans, commuter vehicles and trailers
- Partial wrap or full wrap coverage
For clients with multiple branches, we can create one master layout and then assign each branch a standard variation. This works well for fleets in Kya Sand, Sandton, Midrand, the East Rand, Pretoria and Durban where vehicles may be scheduled and swapped between areas.
Where It Suits Best
This package suits any operation that depends on road presence and quick recognition. It is commonly used by trade contractors, logistics teams, service companies, food distribution fleets, franchise vehicles, property maintenance crews and corporate support units. If your vehicles visit customer sites, business parks, estates or industrial areas, a clear livery helps people know who has arrived before the driver steps out.
It is also useful where vehicles are shared by multiple drivers. A standard livery reduces mix ups, supports staff discipline and makes it easier for supervisors to check that the right unit is on the road. In Johannesburg traffic and on long coastal routes, branding that stays readable from a distance is worth more than a fancy look that fades quickly.
- Multi branch operations needing one look nationwide
- Fleet owners with replacement vehicles added over time
- Companies that need easy identification for security access
- Businesses wanting cleaner presentation on site visits
For municipal work, site access or contract driving, some clients also ask for unit numbers, reflective safety chevrons or low glare finishes. That can be included where needed, depending on the rules of the site or tender spec.
Installation, Space and Power Needs
Installation is done in controlled bays with clean surface prep before any material goes on the vehicle. Most fleet units are booked by appointment so the line-up can be managed properly and vehicles are not standing around longer than needed. We usually start with wash down, degreasing and inspection for chips, rust spots or old adhesive before fitting the new livery.
For standard cut vinyl or partial livery, the process does not need special power or gas from the client side. We use our own production and fitment equipment on site. If your operation is arranging multiple vehicles, please allow parking space for drop off, collection and, where needed, overnight curing before the vehicle goes back into service. In summer heat or damp coastal weather, a bit of extra curing time helps the adhesive settle properly.
- No power or gas supply required from your premises
- Clean, shaded parking makes handover easier
- Allow time for prep, fitting and curing
- Fleet bookings can be staggered to keep vehicles on the road
For larger rollouts, we can schedule units in batches so your daily operations keep moving. That is often the better option for courier teams and service fleets that cannot afford to lose a whole row of vehicles at once.
Care, Servicing and Replacement Planning
A fleet livery should be easy to maintain, not a problem every time the vehicle is washed. After fitting, the surface should be left alone for the first few days if possible, especially in cold weather. Once cured, regular washing with mild soap and soft cloths is enough for most fleet units. Avoid high pressure spray too close to edges, and do not use harsh solvents on printed sections or around seams.
For vehicles that work long hours in sun, dust or coastal humidity, a simple inspection once a month helps catch lifting edges, stone damage or wear around handles and wheel arches. If a panel is damaged in a knock or accident, we can often replace that section rather than redo the whole vehicle. That keeps downtime low and the branding looking decent.
- Wash with mild soap and plenty of water
- Do not aim pressure washers at edges and joins
- Check seams, corners and fuel flap areas monthly
- Plan for replacement panels after body repairs
Good aftercare also helps with resale value. A neat, removable fleet livery means the vehicle can be returned to plain paint later if required, provided the original finish was in reasonable condition and the wrap was maintained properly.
What to Check Before You Order
The best fleet results come from getting the details right upfront. Before ordering, check how many vehicles are in scope, what each body type is, which colours must be matched and whether the livery needs to work on leased vehicles or privately owned units. You should also confirm if there are branch codes, vehicle numbers or driver names that need to be included.
It helps to send a current vehicle list with make, model, year and colour, plus clear photos of both sides, rear and front. If some units already have decals or old wrap material, let us know so the removal and prep time can be allowed for. If you are running different fleets from the same business, one for example service and one sales, that should be separated in the brief to avoid a messy result.
- Vehicle list with makes, models and colours
- Logo files and contact details in usable format
- Branch names, unit numbers and any compliance text
- Preferred rollout dates and vehicle availability
When you order, ask for the livery standard to be documented so future vehicles can match it. That makes reorders quicker and stops small changes creeping in over time, which is where most fleet branding starts to look untidy.
Key facts
| Package type | Standardised fleet livery for multi vehicle operations |
|---|---|
| Coverage options | Partial livery, full wrap sections, decals, numbering, reflective safety marks |
| Vehicle range | Cars, SUVs, bakkies, panel vans, trailers and light commercial vehicles |
| Installation | Fitment in controlled bays with surface prep, cleaning and curing |
| Power and gas needs | No client power or gas supply required |
| Care | Mild soap wash, monthly inspection, edge protection and repair panel replacement |
